Hi Randy, You probably updated to version 2.XXX which is not accessible with Jaws. You need to go back to version 1.75 & follow the steps below to keep the definitions updated but, not update the program. If you reinstall version 1.75 & are asked if you would like to update, say no, & wait until you get the settings changed via the steps below before updating. If you're running the free MWb program, I don't know if you can make these changes or not.
1. Press enter on Malware Bytes in the system tray & arrow to, start scanner, & press enter. 2. With Malwarebytes open, tab until you land on the Exit button. 3. Press the up arrow key once, which will place you on the tabs that contains Scanner, Protection, Update, etc. 4. Hold down the Ctrl key and right arrow to the, Settings, tab. 5. On the Settings tab, tab 1 time & you'll be on the, General tab but, do not tab right here. You want to press, control + right arrow, to the, Updater Settings Tab. Now on the, Updater Settings Tab, tab 1 time to, Download and install program update if available, & uncheck this box. Tab 1 more time to, Notify me when a program update is ready for installation, & uncheck this box as well. 6. Now tab to, Exit, & press enter. Take care. Mike This email was sent from my, iBarstool. ----- Original Message ----- From: randy tijerina To: jaws-users-list@jaws-users.com Sent: Saturday, June 21, 2014 5:41 PM Subject: [JAWS-Users] a more accessible version of Malwarebytes? Friends, i'm in a bit of a pickle. I was asked to update to a new or latest version of this program. I ended up with premium something. when I route jaws to pc, I cann't find anything. no scan buttons, nothing!. any suggestions? For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/