Hello David, The key to the right of the dot 6 key is the enter key. If you start at the spacebar moving right you find dots 4, 5, 6 and 8. The dot 8 is the enter key. It is immediately to the right of the dot 6 key and the top of the dot 8 or enter key is parallel to the middle of the dot 6 key.
You will need to make sure that the device is set as the default Braille display for JAWS. After making sure the switch is slid toward the front of the unit and the display shows terminal mode you might need to reload JAWS. If the display is set as default and JAWS won't load it after the reload of JAWS you might need to HIMS USB driver installed. I can send you a link to download the USB driver if necessary. Take care. Brian Lee [email protected] -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of david Sent: Wednesday, September 09, 2015 4:24 AM To: [email protected] Subject: Re: [JAWS-Users] braille edge with jaws; hello Brian; thanks for the help, however, I need you to tell me where is the enter key? it's been quite some time since I've used a braille edge. thank you. -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Brian Lee Sent: Tuesday, September 8, 2015 5:31 PM To: [email protected] Subject: Re: [JAWS-Users] braille edge with jaws; Hi David, When the display says "terminal for screen reader" the enter key needs to be pressed and the display will read "Terminal mode." Also, the switch on the left side of the unit needs to be slid toward the front of the unit. If the switch is in the back position Bluetooth can be used. For USB connection the switch should be pushed toward the front of the BrailleEdge. Take care. Brian Lee [email protected] -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of david Sent: Tuesday, September 08, 2015 11:47 AM To: [email protected] Subject: [JAWS-Users] braille edge with jaws; good afternoon to all; one of my client's is having problems with the braille edge and jaws. he recently moved into a university residence, when he hooked up his computer, the braille display shows terminal screen reader. could someone tell me how to get it back to usb settings? thank you. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
