Hi Geno,

Have you checked your desktop theme?  It's possible this changed.  The 
default is Windows7 Basic, & if you want to change it to Windows Classic try 
the following.

1 thing to try is change your Desktop Theme to Windows Classic.  Before 
doing this, go to your control panel / Sounds link, open it, & control + 
tab, to, the Sounds tab, & check which Sounds Theme you're running. 
Changing the Desktop Theme can change the Sound Theme you're running.  Your 
current Sound Theme should be highlighted.  After you find your out what 
current Sound Theme tab to, Cancel, & press enter.  Alt + F4 to close the 
control panel.

Taking the Desktop out of the loop when using Alt + Tab.

If you want to change your desktop theme to Windows Classic.  Try the 
following:
1. While on the desktop make sure nothing is selected.  Press control + 
spacebar until you hear not selected.  You can also press the F5 key.
2. Open your context menu, up arrow to personalize, & press enter.
3. Press down arrow until you get to an item called Windows7 Basic.  Right 
arrow to Windows Classic. Hit the enter key to make the
desired change.
4. Wait a few seconds or until you hear an audio sound effect confirming the 
completion of this process. I would wait another 2
minutes or so as your computer is making lots of changes and you want to 
allow lots of time for the process to complete.

Now, go back to the, control panel / Sounds / Sounds Tab to check your Sound 
Theme.  If it changed, select the theme you want, tab to the Okay button & 
press enter.

Take care.
Mike
Sent from my iBarstool.  Go Dodgers!
----- Original Message ----- 
From: Geno9802
To: [email protected]
Sent: Saturday, June 25, 2016 1:43 PM
Subject: [JAWS-Users] Question on Desk-top and Icons


Adrian
Ok in this Standard, and Classic/old XP where do I find to check this. It
sounds to me you are saying Standard. MR. David F. Set up my computer when I
purchased it. So not sure. So if you could tell me where to look and what to
do would be great. Geno, Portland, ME.
-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Adrian Spratt
Sent: Saturday, June 25, 2016 3:37 PM
To: [email protected]
Subject: Re: [JAWS-Users] Question on Desk-top and Icons

Hi, Geno. I know you have Win7, 64-bit, as do I. However, do you recall if
you've switched between a standard Windows 7 layout or one that mimics the
old XP layout, which I think Win7 calls "classic"? I ask because I vaguely
recall that the desktop doesn't show up in the classic layout.

-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Geno9802
Sent: Saturday, June 25, 2016 2:50 PM
To: [email protected]
Subject: [JAWS-Users] Question on Desk-top and Icons

Mike,
I will try to explain a little better. I use to turn on my computer, per
normal each morning. After doing my password and open the Desk-top Icons use
to be easy to go to what-ever  Icon I wanted. Or if, example, done working
in Medical documents for my son, Outlook open, Internet open for the Portal.
Of course ALT-Tab back and forth and of course the Desk-top Icons are
usable. Now If I close out for Back up for "My Computer Works," Company or
do a VIA computer to computer work with them, I am closing all programs I
have open. It is at this time there is no jaws use on the Desk-top, for Jaws
to function. So have to do the Windows key and Letter, M-Mike key-stroke and
bingo it is there. I guess in my 66 and soon to be 67 I like the Idea of
when closing out of all the programs, that the Desk-top Icons are "Visible,"
to the Jaws instead of doing Windows key and the Key Letter M as in Mike.
I had this ability till I up-graded Aslogic   Defrag and Aslogic Register
cleaner. Now I had "My Computer Works," Company take a look at during my
every two Months tune up with them, yesterday and he said nothing he could
see with the installation  in up dating either one. In fact of checking the
Aslogic, register, which he  noted some times that program chan change
things, he seen no fault there. I just know I had the Desk-top Icons
available to me till I up-dated both Aslogic programs. Does this make it a
little easier what I am wanting back? Geno, Portland, ME.
-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Mike B
Sent: Saturday, June 25, 2016 1:10 PM
To: [email protected]
Subject: Re: [JAWS-Users] Question on Desk-top and Icons

Hi Geno,

Are you wanting to be able to Alt + Tab to the desktop instead of using the
Windows key + M keystroke?
Take care.
Mike
Sent from my iBarstool.  Go Dodgers!
----- Original Message -----
From: Geno9802
To: [email protected]
Sent: Saturday, June 25, 2016 4:57 AM
Subject: [JAWS-Users] Question on Desk-top and Icons


This is in Portland, ME. The question is some how on this Tower of mine, did
a up-date with Aslogic and managed to mess up the Desk-top Icons, for Jaws
to read them. Unles doing windows and Letter M as  in Mike. So this is a
Windows 7 machine and running the latest of registered  Jaws 17. Any help in
getting my Icons back all the time instead of doing Windows plus M as in
Mike would be greatly appreciated. Need  instructions where to go and what
to do, thank-you in advance. Geno

-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Mauricio Molina
Sent: Friday, June 24, 2016 9:50 PM
To: [email protected]
Subject: Re: [JAWS-Users] having trouble installing jaws 17 on windows 7 64
bit

Try pressing Alt+Tab to locate a Windows Security dialog. It is possible you
are being asked if you want to allow the operation. This is not the User
Account dialog (UAC), but I have seen this when first installing JAWS for
the first time on some computers.

Mauricio

-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Michael Amaro
Sent: Friday, June 24, 2016 4:22 PM
To: [email protected]
Subject: [JAWS-Users] having trouble installing jaws 17 on windows 7 64 bit

Hello Listers,

My friend has a computer running windows 7 64 bit.  I am trying to install
jaws 17.  It keeps getting hung up at the audio intercept at 42 percent. how
can I get past this?
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/

For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/ 
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/

Reply via email to