It's just too high teck for me. I had to do some editing back for version 5.0 of jaws because the combo boxes weren't reading right and I did what they told me to do but let me tell you it bout scared the liver out of me because I just knew it was gonna fail and that would be the end of jaws and me.. I like these steps like I posted for the scan disk all laid out step by step that stuff like this is just too frightening to me.. I'll probably never be the type of jaws/computer user who goes beyond the norm I hate change and I'm very organized and like it all to work the same consistently.. And thank God for this list!!! Grins..
Hailley ----- Original Message ----- From: "David Ferrin" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, October 05, 2006 1:26 PM Subject: Re: [jaws-users] Multiple sound cards and JAWS > Actually I'll most likely be taking a shot at this in the near future. My > old computer bit the dust yesterday but of course I'm not going to junk > it. Oh no on that at all. I'm planning on scavenging parts like the > sound card ETC and use them where ever I can put them to work for me. > David Ferrin > personal email address > [EMAIL PROTECTED] > Consciousness is that annoying time between naps. > ----- Original Message ----- > From: one foxy lady > To: [email protected] > Sent: Thursday, October 05, 2006 2:02 PM > Subject: Re: [jaws-users] Multiple sound cards and JAWS > > > Yikes!! Good luck to whoever attempts this one... > > ----- Original Message ----- > From: "Bill Gallik" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, October 05, 2006 11:55 AM > Subject: Re: [jaws-users] Multiple sound cards and JAWS > >> Yes, there is a way to do what you ask; please note the following from my >> JFW.INI file: >> >> Synth2Name=eloq >> Synth2LongName=Eloquence for JAWS >> Synth2Driver=eloq >> Synth3Name=eloqUSB >> Synth3LongName=Eloquence Via USB for JAWS >> Synth3Driver=eloq >> Synth3Port=USB Audio Device >> >> By default, JAWS loads at boot time for me with AccentSA as the speech >> driver. However, I can use the standard sound card with Eloquence or >> Eloquence with my secondary sound device. >> Note that the Synth3 entries instruct JAWS to use the secondary sound >> device >> and this is achieved mainly by defining the Synth3Port as the name of >> that >> sound device, this name can be identified by: >> >> 1) Bringing up the main system menu >> 2) Opening Settings >> 3) Selecting Control Panel >> 4) Selecting and activating the "Sounds" item >> 5) Moving to the "Audio" tab and browsing the list of sound devices, >> noting >> the name of that secondary audio device verbatim. >> 6) Using this secondary audio device name as the Synth#Port value in the >> JFW.INI file (where Synth#Port substitutes the correct number with the >> "#" >> symbol. >> >> Note tht the SynthDriver will be "eloq" in either case, but for usability >> the SynthName and SynthLongName values should somehow indicate that the >> secondary audio device is employed. >> >> Also, these instructions assume that the secondary audio device has >> already >> been installed. >> HTH >> ---------------- >> Bill Gallik >> E-Mail: [EMAIL PROTECTED] >> - "It's no longer a question of staying healthy." >> - "It's a question of finding a sickness you like." >> - Jackie Mason >> >> >> >> >> Visit the JAWS Users list home page at: >> http://www.jaws-users.com >> >> For a complete list of email commands pertaining to the JAWS Users List >> send a blank email to: >> [EMAIL PROTECTED] >> >> Visit the new archives page at the following address >> http://www.mail-archive.com/[email protected]/ >> Yahoo! Groups Links >> >> >> >> >> >> >> >> >> >> >> > > > > > > [Non-text portions of this message have been removed] > > > > Visit the JAWS Users list home page at: > http://www.jaws-users.com > > For a complete list of email commands pertaining to the JAWS Users List > send a blank email to: > [EMAIL PROTECTED] > > Visit the new archives page at the following address > http://www.mail-archive.com/[email protected]/ > Yahoo! Groups Links > > > > > > > > > > Visit the JAWS Users list home page at: http://www.jaws-users.com For a complete list of email commands pertaining to the JAWS Users List send a blank email to: [EMAIL PROTECTED] Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/jaws-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/jaws-users/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
