We have. Just curious, when you manually query the snmp key for those, do you get any information? (I haven't checked ours yet, but I will and that way we'll see if it's just not getting any information back?).
Just an idea. -----Original Message----- From: Chris Epler [mailto:[EMAIL PROTECTED] Sent: Friday, July 30, 2004 2:23 PM To: [EMAIL PROTECTED] Subject: [jffnms-users] Graphing environment variables I'm having a problem graphing the environmental information from a few Cisco's (7500/7200). When I did a manual discovery I was able to detect the power supplies and the temperature probes. I selected them to be polled but whenever I attempt to view the 'performance data' for those items I get no graphs: "The RRDTool files for Interface ID 25 (from Host ID 2), has not been created by the Poller Process yet." Other interfaces (Serial ports, ethernet etc) appear to graph properly so the poller IS running... any ideas? Anyone else run into problems with voltages/power supply/temperature graphing? -- /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
