Jason,
Cisco does not offer a Voltage Value for graphing in the MIB I used.
Javier
Jason Humes wrote:
Hi So I've got my Cisco devices graphing temp. OK now, with the fix listed in this thread, but I was wondering about the voltage graphs...did you find a fix for those as well? Thanks.
Jason
-----Original Message-----
From: wireless [mailto:[EMAIL PROTECTED] Sent: Monday, August 02, 2004 5:13 PM
To: [EMAIL PROTECTED]
Subject: [Fwd: Re: [jffnms-users] Graphing environment variables]
> Chris,
> I'm glag it worked.
>
> There are not graphs for PowerSupplys or Voltage, I think there are
> no such values in the MIB.
>
> Only a flag alerting us if theres a problem (that is translated to
> an event).
>
> Javier
>
> Chris Epler wrote:
>
>> On Fri, 30 Jul 2004 18:15:41 -0300, Javier Szyszlican
>> <[EMAIL PROTECTED]> wrote:
>>
>>
>>> Right, sorry, change the line 6 to:
>>>
>>> $opts_DEF = rrdtool_get_def($data,array("temp_c"=>"temperature"));
>>
>>
>>
>> Excellent, that did it! Thank you! Now, on to power supply/voltage >>
graphs...not getting graphs on those but need to verify my >> configuration
on them. (They do graph right? Cisco, voltage/power >> supply status?
Getting: Error: No Interface Graphs were returned. >> right now..) >> >
Temperature, voltage and current measurements withing a system are problematic, but, very important. Many of the semiconductors used are accurate enough, but, are either not correctly supported in the product's firmware, or are monitoring at the wrong places within a given piece of equipment. I2C busses are quite often used internally in a product, and may be OK for temperature as it does not change that fast, but use of I2C ('I squared C') buss in often not capable of supplying accurate(fast enough) sensor reading data and realtime calculations of complex power states within a systems power. None the less often they are there and somewhat useful, even if not very accurate.
I've been custom building external hardware and sensors for those sorts of purposes, and need to "inject data" into either a SCADA (Supervisor Control and Data Aquisition System) or something like JFFNMS. If there is a wider interest in accurately monitoring the power supply (target equipment' UPS and the commercial distribution) into a package such as JFFNMS), then drop me a line....
James
------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED]
I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate
------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
