Hello Javier, I have had to make some changes to the snmp_interfaces discovery plugin for Alteon interfaces.
The ifTable has two types of interfaces. The first is like the switch controller (sc0) in the old Catalysts. They are logical interfaces with IP addresses. The second sent are the physical ports. As an added bonus, the physical ports have the same ifDescr. By default the table would look like this ifIndex | ifDescr | Description | Actual Port 1 | net0 | | Logical IP interface 257 | utp ethernet (10/100) | | Physical port #1 258 | utp ethernet (10/100) | | Physical port #2 259 | utp ethernet (10/100) | | Physical port #3 (etc) I now check for a webos device and if found a function is called to fill in the ifDescr and ifAlias arrays, with list ($ifDescr, $ifAlias) = webos_info(....); It checks that the index is below the maxIPInt snmp value and if so modifies ifDescr to be "Port " $index-maxIPInt There is also a private ifDescr which is where the ifAlias gets its info The table looks like ifIndex | ifDescr | Description | Actual Port 1 | net0 | | Logical IP interface 257 | Port 1 | Link to bb | Physical port #1 258 | Port 2 | | Physical port #2 259 | Port 3 | | Physical port #3 (etc) If this is ok, ill send you the patch. -- Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5 Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer csmall at : enc.com.au ieee.org debian.org ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
