Javier, why exactly? It concerns the same routers, i.e. cisco 800's, 1600, 1700 and 2600, so I guess same oid. I just want to know, that it is possible to use jffnms while the graphs (rrd files) are sent to another device (one cisco 7200), and that jffnms can take those graphs from that device and use them ? greetz Johan
On Sun, 2005-02-13 at 12:10 -0300, Javier Szyszlican wrote: > Hi Johan, > > You will need to do some custom coding to monitor MPLS oids. > > I'm not an expert in MPLS, so I can't help you much. > > Javier > > johan wrote: > > Javier, > > > > The problem concerning not seeing the internal messages, was caused by > > the id=1 of the hosts-table : since i hadnt used for this id in the > > older versions a zone, he didnt show it in the events. Perhaps > > suggestions for other people who do upgrades. > > > > But i have some other question : we have a lot of mpls routers here and > > they asked me to monitor those too. Since the server isnt in the > > mpls-ring : this is a ring with private ip's : The mpls endpoint at our > > site transfert the public ip in private ip. This causes the problem, > > since the server needs to be in all the mpls-rings, which isnt possible. > > So what they are gonna do is putting a cisco 7200, who is in all those > > rings, where snmp will run and letting receive the rrd-files and send > > them through to my server. Question : is this possible and what would > > you suggest ? > > > > Thx and greetz, > > Johan > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
