Thanks for your fast reply,
I know how to do this in the CLI, but I would like to have this
information in JFFNMS.
Best regards,
Pieter Veenstra
Network Engineer
GN-IX
[EMAIL PROTECTED]
________________________________
Van: Paul Stewart [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 6 maart 2007 15:59
Aan: Pieter Veenstra; jffnms-users@lists.sourceforge.net
Onderwerp: RE: [jffnms-users] display vlan's configured on a port
A quick "sh vlan" will show a list of VLAN's with their ports ....
A "sh interface FastEthernet 4/22 switchport" will show you other
info...
Hope this helps...
Paul
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pieter
Veenstra
Sent: Tuesday, March 06, 2007 9:48 AM
To: jffnms-users@lists.sourceforge.net
Subject: [jffnms-users] display vlan's configured on a port
Is there a possibility to show the vlan's that are configured on a port.
I'm using Cisco 6509 switches, and I see the ports en the vlan's,
everything is working correct. But when I select a port, I would like to
see which vlan's are on that port.
And when I select a vlan, I would like to see which port(s) it is on.
Is this possible? And if it is not already programmed, can you give me a
description how it should be done, so I can work on it.
Best regards,
Pieter Veenstra
Network Engineer
GN-IX
[EMAIL PROTECTED]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
