No. I don’t know how to do that. Can you give instructions on creating a new port? Perhaps that fits with a setting in the embosser where I can set a static IP address. So far I have just used the embosser dynamic IP address. The Index manual is very vague on wireless networking.
But this is not really JAWS related, so if you have any further suggestions, please write privately. My email is after my name. Thanks. Jean [email protected] From: HH. Smith Jr. Sent: Tuesday, January 26, 2016 2:25 PM To: [email protected] Subject: Re: Windows 10 deleting a printer Hello Jean, Have you tried creating a new port and giving the embosser a dedicated ip address on the network. From: Jean Menzies [mailto:[email protected]] Sent: Tuesday, January 26, 2016 3:47 PM To: [email protected] Subject: Re: Windows 10 deleting a printer hi Tom, That’s interesting. I never had this problem with Windows 8.1 using Jaws 15. This might mean it is a Jaws 17 problem not reading that window. From: Bissett, Tom Sent: Tuesday, January 26, 2016 7:10 AM To: [email protected] Subject: Re: Windows 10 deleting a printer I find the same behaviour on win 8.1. Fortunately you are placed on the yes button by default. It might be the same for win 10. Regards Tom Bisset From: Jean Menzies [mailto:[email protected]] Sent: Monday, January 25, 2016 9:55 PM To: [email protected] Subject: Windows 10 deleting a printer Using Jaws 17 (current, and Windows 10. When deleting a printer, Jaws does not read the delete window. E.g., go to printer, press enter to select, tab to Remove. Then all Jaws reads is Fly Out Window. It does not read the text as in Are you sure you want to delete this printer? Yes, No, Cancel, or whatever the choices are. I needed sighted help to remove a printer definition. Just sharing this for what it’s worth. Jean This email has been sent from a virus-free computer protected by Avast. www.avast.com
