Hi Adrian, Try the following steps but, these steps are for putting a program to sleep so, in step 6 press the spacebar until Jaws reports, Sleep Mode Disable.
These are steps on how you can put Jaws into sleep mode or make any other changes in the Settings Center for any program installed on your computer without the particular / target program running. Below are steps using Openbook & putting Jaws into sleep mode as an example. When you shift + tab into the application list & find the application you want, you need to tab 1 time into the Settings Center for that application. Pressing enter on the application closes the Settings Center. So, here is how I accessed the Openbook Settings Center: 1. While in Outlook Express I pressed Insert key + 6, on the number row above the main keyboard to open the Outlook Express Settings Center. 2. I invoked the keystroke, shift + tab, to get into the application list. 3. I pressed the letter O, until I had Openbook highlighted. 4. I tabbed 1 time into the Openbook Settings Center. 5. I Typed, sleep, into the search edit field & waited a few seconds for the list to populate & arrowed down to Sleep Mode ..... miscellaneous. 6. Now, right here the spacebar needs to be pressed to toggle the options until Jaws reports, sleep mode enable and unload the synthesizer. 7. Tab to apply, press the spacebar, tab to okay, press the spacebar to save your changes & close. HTH Take care. Mike This email was sent from my, iBarstool. ----- Original Message ----- From: Adrian Spratt via Jfw To: The Jaws for Windows support list. Sent: Friday, June 06, 2014 9:05 AM Subject: Returning speech to a program in sleep Hi. When installing a certain application on my system, the company's techy set JAWS to be silent when it ran. I would like JAWS to speak there. I've tried two methods to undo the sleep setting for that application. One is via the settings center. In another window, I select the application name, go to sleep, select disable and click on OK. It doesn't bring back speech. My other method was to open the application, then press the JAWS key+spacebar/s command. A few tries at this also made no difference. Any ideas for another method the company rep might have used and how to undo it? Or am I missing something in the steps I list Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20140606/59d9cf6b/attachment.html> _______________________________________________ Jfw mailing list [email protected] http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20140606/edde092d/attachment.html> _______________________________________________ Jfw mailing list [email protected] http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
