Dear Elliot, Sorry that I see you post so late. Here is the link to the log file, it is quite long. https://gist.github.com/batukav/a92745c86fa79279b495
This log file is created after the command make OPENBLAS_TARGET_ARCH=NEHALEM -B 12 Ağustos 2014 Salı 19:41:51 UTC+3 tarihinde Elliot Saba yazdı: > > Can you post the full log somewhere? Unfortunately the actual error is a > little higher up in the log, and we can't see it here. If the log is too > long for email, you can create a gist <https://gist.github.com/> or a > pastebin <http://pastebin.com/> of it and link it here. > > Also, information about your cluster hardware and operating system would > be helpful. Is it virtualized at all? > -E > > > > On Tue, Aug 12, 2014 at 4:54 AM, Batuhan Kav <[email protected] > <javascript:>> wrote: > >> Dear All, >> >> I am trying to install Julia into our cluster. I ran git to obtain data, >> and then ran 'make'. I got the following error: >> >> make[4]: *** [strmm_kernel_RT_SANDYBRIDGE.o] Error 1 >> make[3]: *** [libs] Error 1 >> *** Clean the OpenBLAS build with 'make -C deps clean-openblas'. Rebuild >> with 'make OPENBLAS_USE_THREAD=0 if OpenBLAS had trouble linking >> libpthread.so, and with 'make OPENBLAS_TARGET_ARCH=NEHALEM' if there were >> errors building SandyBridge support. Both these options can also be used >> simultaneously. *** >> make[2]: *** [openblas-v0.2.10/libopenblas.so] Error 1 >> make[1]: *** [julia-release] Error 2 >> make: *** [release] Error 2 >> >> To fix, I ran 'make OPENBLAS_USE_THREAD=0 OPENBLAS_TARGET_ARCH=NEHALEM', >> but I obtained the same error again. >> >> How can I fix this? >> >> Cheers. >> > >
