Hi Elliot, No, it didn't work. As the log suggests, I used make OPENBLAS_TARGET_ARCH=NEHALEM OPENBLAS_USE_THREAD=0 this time, both options simultaneously. I again attach the log file generated by this command. https://gist.github.com/batukav/920723a3d02bd1c28450
-B 4 Eylül 2014 Perşembe 18:32:13 UTC+3 tarihinde Elliot Saba yazdı: > > Hrmm... looks like it's still compiling Sandybridge kernels. Could you > try defining OPENBLAS_DYNAMIC_ARCH=0 and see what happens? > > We should probably disable OPENBLAS_DYNAMIC_ARCH if OPENBLAS_TARGET_ARCH > is defined. > -E > > > On Thu, Sep 4, 2014 at 7:00 AM, Batuhan Kav <[email protected] > <javascript:>> wrote: > >> Dear Elliot, >> >> Sorry that I see you post so late. Here is the link to the log file, it >> is quite long. https://gist.github.com/batukav/a92745c86fa79279b495 >> >> This log file is created after the command make >> OPENBLAS_TARGET_ARCH=NEHALEM >> >> -B >> 12 Ağustos 2014 Salı 19:41:51 UTC+3 tarihinde Elliot Saba yazdı: >>> >>> Can you post the full log somewhere? Unfortunately the actual error is >>> a little higher up in the log, and we can't see it here. If the log is too >>> long for email, you can create a gist <https://gist.github.com/> or a >>> pastebin <http://pastebin.com/> of it and link it here. >>> >>> Also, information about your cluster hardware and operating system would >>> be helpful. Is it virtualized at all? >>> -E >>> >>> >>> >>> >>> On Tue, Aug 12, 2014 at 4:54 AM, Batuhan Kav <[email protected]> wrote: >>> >>>> Dear All, >>>> >>>> I am trying to install Julia into our cluster. I ran git to obtain >>>> data, and then ran 'make'. I got the following error: >>>> >>>> make[4]: *** [strmm_kernel_RT_SANDYBRIDGE.o] Error 1 >>>> make[3]: *** [libs] Error 1 >>>> *** Clean the OpenBLAS build with 'make -C deps clean-openblas'. >>>> Rebuild with 'make OPENBLAS_USE_THREAD=0 if OpenBLAS had trouble linking >>>> libpthread.so, and with 'make OPENBLAS_TARGET_ARCH=NEHALEM' if there were >>>> errors building SandyBridge support. Both these options can also be used >>>> simultaneously. *** >>>> make[2]: *** [openblas-v0.2.10/libopenblas.so] Error 1 >>>> make[1]: *** [julia-release] Error 2 >>>> make: *** [release] Error 2 >>>> >>>> To fix, I ran 'make OPENBLAS_USE_THREAD=0 >>>> OPENBLAS_TARGET_ARCH=NEHALEM', but I obtained the same error again. >>>> >>>> How can I fix this? >>>> >>>> Cheers. >>>> >>> >>> >
