GAY Samuel wrote:
> Hi Eugeniu,
>
> I see 2 mistake in your configuration :
> - you use the same route-distinguisher on the pe-1 and pe-2
> - the interface connected to ce-1 / ce-2 is configured with the unit
> 0. In Junos you have to use unit from 512 to 4095 to the ccc
> encapsulation.
>
Hi,
I've tried to use unit 1024 (as it fits in the range described) and when
I do a commit check I get the following error:
[EMAIL PROTECTED] commit check
[edit interfaces ge-0/0/1]
'unit 1024'
Only unit 0 is valid for this encapsulation
error: configuration check-out failed
Regarding the Route Distinguisher, I thought that it must be the same on
both CEs so that they'll know it's traffic destined for a given routing
instance.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
