On Fri, Nov 09, 2007 at 06:02:29PM +0100, Jeff Tantsura wrote: > Hi Samit, > > No, LACP is supported on any ethernet (not sure about really old ones) > interfaces. > Any relatively new Catalist should support LACP as well, if you are going to > use SX optic on juniper, use SX on cisco as well :)
LACP is supported everywhere, but if you're doing to do LACP + vlan-tagging on the AE you need at least an FPC-E. Original FPCs on classic martini architecture (M5-M160) will do one or the other, but not both simultaniously. Also, my random tidbit of advice for the day... Don't configure native vlan tagging on a Cisco and then try to speak LACP to a Juniper, it will try to tag the LACP control packets with the native vlan ID and confuse the hell out of the Juniper. :) -- Richard A Steenbergen <[EMAIL PROTECTED]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp