Maybe I am not understanding what you are asking, but this is exactly what the copy command is for:
For example: [EMAIL PROTECTED] copy interfaces ge-0/0/0 to ge-1/0/0 That will move over the interface and all logical units associated to it. Or, if you are doing it from router to router, just copy the interface command from the source router/interface, put it in to a text editor and change the pertinent FPC/PIC/SLOT info and paste in to new router... Hope this helps, -Jeff ________________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Jonathan Brashear [EMAIL PROTECTED] Sent: Tuesday, February 19, 2008 2:14 PM To: [email protected] Subject: [j-nsp] Bulk config migration between interfaces? I have a facility(3, actually) I'm upgrading and part of this upgrade involves moving a circuit from one PIC on a M20 FPC to a new PIC on the same FPC. I have a few dozen VLANs that will be migrated as well. Obviously I could do this one by one, but I was curious if anyone knew a way within JunOS that I could move all the logical configuration from one physical interface to another. It would save me a significant amount of time. Network Engineer > 214-981-1954 (office) > 214-642-4075 (cell) > [EMAIL PROTECTED] http://www.speakeasy.net _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
