Hello, I think 'rename' command in configuration mode will match for your case.
ex.# rename interfaces ge-0/0/0 to ge-0/1/0 Regards, -- Tomohiko Kurahashi <[EMAIL PROTECTED]> Internet Initiative Japan Inc. From: [EMAIL PROTECTED] Date: Wed Feb 20 2008 07:14:58 JST > > I have a facility(3, actually) I'm upgrading and part of this upgrade > involves moving a circuit from one PIC on a M20 FPC to a new PIC on the > same FPC. I have a few dozen VLANs that will be migrated as well. > Obviously I could do this one by one, but I was curious if anyone knew a > way within JunOS that I could move all the logical configuration from > one physical interface to another. It would save me a significant > amount of time. > > Network Engineer > > 214-981-1954 (office) > > 214-642-4075 (cell) > > [EMAIL PROTECTED] > http://www.speakeasy.net > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
