There are several products that can generate routes for testing depending on your budget. IXIA devices for example will do this and more. I wanted to the same thing a few months ago and I ended ip logging into a few route servers and outputting a sh route/sh ip route to a text file. Then I just used notepad to add the commands to configure the routes as static routes and pasted the result into the router. This is no way to get the full table, but I got about 25,000 routes (until I got bored). If you really want it to look like the real table you can add the routes to different routers and advertise them from actual ISP AS numbers and/or modify the AS path using with random policies. I did this with cisco boxes so YMMV.
Keegan "wang dong bei" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 02/20/08 12:05 PM To juniper-nsp <[email protected]> cc Subject [j-nsp] How to load a lot of prefixes Hi talented minds, I want to do some testing with BGP and I need to inject a lots of routes, preferably the entire Internet routing table, into some of the routers of an isolated lab. My initial approach is to capture the "show route bgp" output from one of my routers and massage the data into the "set routing-options static prefix....." and load everything into my testing routers. However, the script is more difficult to write, the result is full of errors, and when I load the config, it somehow hang my terminal sessions. So are there anyways to quickly populate the routing table of my testing routers by administrative configuration means? thanks for your help. regards, dong bei _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
