They were actually three different groups of a few thousand routes each. I had routers peered with different ISP AS numbers so that the origins would be realistic. Even then the whole screen goes blank for about 30 seconds or so, but it makes it to the end eventually... Besides this is just temporary until I complete that beginners course on sed.
Leigh Porter <[EMAIL PROTECTED]> 02/20/08 12:58 PM To [EMAIL PROTECTED] cc wang dong bei <[EMAIL PROTECTED]>, [EMAIL PROTECTED], juniper-nsp <[email protected]> Subject Re: [j-nsp] How to load a lot of prefixes Notepad can handle 25000 lines? ;-0 -- Leigh [EMAIL PROTECTED] wrote: > There are several products that can generate routes for testing depending > on your budget. IXIA devices for example will do this and more. I wanted > to the same thing a few months ago and I ended ip logging into a few route > servers and outputting a sh route/sh ip route to a text file. Then I just > used notepad to add the commands to configure the routes as static routes > and pasted the result into the router. This is no way to get the full > table, but I got about 25,000 routes (until I got bored). If you really > want it to look like the real table you can add the routes to different > routers and advertise them from actual ISP AS numbers and/or modify the AS > path using with random policies. I did this with cisco boxes so YMMV. > > Keegan > > > > > "wang dong bei" <[EMAIL PROTECTED]> > Sent by: [EMAIL PROTECTED] > 02/20/08 12:05 PM > > To > juniper-nsp <[email protected]> > cc > > Subject > [j-nsp] How to load a lot of prefixes > > > > > > > Hi talented minds, > > I want to do some testing with BGP and I need to inject a lots of routes, > preferably the entire Internet routing table, into some of the routers of > an > isolated lab. My initial approach is to capture the "show route bgp" > output > from one of my routers and massage the data into the "set routing-options > static prefix....." and load everything into my testing routers. However, > the script is more difficult to write, the result is full of errors, and > when I load the config, it somehow hang my terminal sessions. > > So are there anyways to quickly populate the routing table of my testing > routers by administrative configuration means? > > thanks for your help. > > regards, > > dong bei > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
