Hi, Does anyone has experience with MPLS-TE interoperability between IOS (specifically ME6500, but it's probably like any other 12.2SX IOS) and JUNOS (recent/stable/good-for-service-providers version) ?
I was wondering about 2 cenarios in particular: 1) JUNOS as head-end or tail-end, but not middle-point 2) JUNOS as head-end, tail-end and middel-point All routers would be in the same OSPF area 0, within the same AS #; TE is done by explicit naming of both primary, secondary paths, and a dynamic backup path. AUTOBW is desired. On IOS, traffic is injected on the tunnel using static route to the loopback address; OSPF contains only link states and loopbacks, directly-connected, customer static routes or customer dynamic routes are propagated via IBGP. Tks, Rubens _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
