Hi Lee Can you provide us for some traces:
Monitor trafic interface se-1/0/1 We will see the lmi traffic And Show interface se-1/0/1 extensive I believe it's an LMI problem Normaly the default lmi on Juniper is ansi like the one you've configured on Cisco (so this should be OK) But perhaps the keepalive could be adapted (5 ?) I am also wondering why you configured "serial-option: clocking-mode loop" ! Alain -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Lee Hetherington Envoyé : mardi 17 juin 2008 14:06 À : [email protected] Objet : [j-nsp] Serial Question Hi All, I have a J2320-JH which is replacing an aging Cisco 3640. I am having trouble bringing up an x.21 leased line. It brings up the line, but in cisco terms not the protocol. It keeps telling me on my subinterface "flags: down". Below are my cisco and juniper configs. Anyone any ideas, the isp is being particularly un-helpful. Cisco: ! interface Serial0/0 bandwidth 2048 no ip address encapsulation frame-relay no ip mroute-cache keepalive 5 no fair-queue frame-relay lmi-type ansi ! interface Serial0/0.16 point-to-point description Telstra Circuit ip address 154.32.xxx.81 255.255.255.252 no cdp enable frame-relay interface-dlci 16 IETF ! Juniper: se-1/0/1 { description Telstra; mtu 1500; encapsulation frame-relay; serial-options { clocking-mode loop; } unit 0 { description "Telstra Serial Circuit MXFS203988"; point-to-point; dlci 16; family inet { address 154.32.152.81/30; } } } Many Thanks, Lee _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
