No config missing. JUNOS software does not support the required VCCV
interface parameter sub-TLV in it's PW signaling advertisements. This
will be supported in JUNOS 9.2R1.
--Stacy
On Jul 25, 2008, at 12:21 AM, Dinesh Bhonsle wrote:
Hi,
I have a l2vpn circuit between Juniper M320 and Alcatel 7750 box.
But Juniper does not seem to send any vccv ping related parameters
(CC, CV)
to alcatel.
I have enabled control-word on both sides for the pseudowire
l2circuit {
neighbor 192.168.1.1 {
interface ge-0/0/1.700 {
virtual-circuit-id 3000001;
control-word;
}
}
}
I am I missing any config ?
Regards
Dinesh
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
