All, RIPE is eager to know the number of IPs I use at a given time. I can graph percent of pool (MRTG -> juniDhcpLocalServerPoolUtilPct), but it seems that the OID I want isn't supported. Could this be a version issue? I run 8.2.3.
Regarding http://www.oidview.com/mibs/4874/Juniper-DHCP-MIB.html the OID I'd want probably is juniDhcpLocalServerPoolInUse (1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.19) However, walking the ERX shows that .19 is not there: (...) .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.15.10.105.110.116.101.114.110.101.116.116 .49 = INTEGER: 85 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.15.10.105.110.116.101.114.110.101.116.116 .50 = INTEGER: 85 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.15.10.105.110.116.101.114.110.101.116.116 .51 = INTEGER: 85 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.16.10.105.110.116.101.114.110.101.116.116 .49 = INTEGER: 75 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.16.10.105.110.116.101.114.110.101.116.116 .50 = INTEGER: 75 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.16.10.105.110.116.101.114.110.101.116.116 .51 = INTEGER: 75 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.17.10.105.110.116.101.114.110.101.116.116 .49 = INTEGER: 99 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.17.10.105.110.116.101.114.110.101.116.116 .50 = INTEGER: 97 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.17.10.105.110.116.101.114.110.101.116.116 .51 = INTEGER: 14 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.18.10.105.110.116.101.114.110.101.116.116 .49 = INTEGER: false(2) .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.18.10.105.110.116.101.114.110.101.116.116 .50 = INTEGER: false(2) .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.18.10.105.110.116.101.114.110.101.116.116 .51 = INTEGER: false(2) .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.21.10.105.110.116.101.114.110.101.116.116 .49 = INTEGER: 0 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.21.10.105.110.116.101.114.110.101.116.116 .50 = INTEGER: 0 .1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.21.10.105.110.116.101.114.110.101.116.116 .51 = INTEGER: 0 or Juniper-DHCP-MIB::juniDhcpLocalServerPoolHighUtilThreshold."internet1" = INTEGER: 85 Juniper-DHCP-MIB::juniDhcpLocalServerPoolHighUtilThreshold."internet2" = INTEGER: 85 Juniper-DHCP-MIB::juniDhcpLocalServerPoolHighUtilThreshold."internet3" = INTEGER: 85 Juniper-DHCP-MIB::juniDhcpLocalServerPoolAbatedUtilThreshold."internet1" = INTEGER: 75 Juniper-DHCP-MIB::juniDhcpLocalServerPoolAbatedUtilThreshold."internet2" = INTEGER: 75 Juniper-DHCP-MIB::juniDhcpLocalServerPoolAbatedUtilThreshold."internet3" = INTEGER: 75 Juniper-DHCP-MIB::juniDhcpLocalServerPoolUtilPct."internet1" = INTEGER: 99 Juniper-DHCP-MIB::juniDhcpLocalServerPoolUtilPct."internet2" = INTEGER: 97 Juniper-DHCP-MIB::juniDhcpLocalServerPoolUtilPct."internet3" = INTEGER: 14 Juniper-DHCP-MIB::juniDhcpLocalServerPoolTrapEnable."internet1" = INTEGER: false(2) Juniper-DHCP-MIB::juniDhcpLocalServerPoolTrapEnable."internet2" = INTEGER: false(2) Juniper-DHCP-MIB::juniDhcpLocalServerPoolTrapEnable."internet3" = INTEGER: false(2) Juniper-DHCP-MIB::juniDhcpLocalServerPoolSharedInUse."internet1" = INTEGER: 0 Juniper-DHCP-MIB::juniDhcpLocalServerPoolSharedInUse."internet2" = INTEGER: 0 Juniper-DHCP-MIB::juniDhcpLocalServerPoolSharedInUse."internet3" = INTEGER: 0 If someone else report to RIPE or similar - how do you monitor/graph this? /BT _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
