Eric,
Ah. Removing the backup software should fix the problem. We've seen the
issue a couple of times and that usually does the trick.
Regards,
Andrea Duey
[email protected]
1-888-314-JTAC
07:00 AM - 03:00 PM MST (UTC - 0700) Monday - Friday
Please CC: [email protected]
To have your case reassigned to another engineer please email
[email protected] with your case number in the subject line.
Please visit our Knowledge Base http://kb.juniper.net/
Eric Van Tol wrote:
-----Original Message-----
From: Andrea Duey [mailto:[email protected]]
Sent: Friday, January 16, 2009 1:04 PM
To: Eric Van Tol
Cc: [email protected]
Subject: Re: [j-nsp] Upgrade on J-series
Eric,
Is 9.1R2.10 the old version you are upgrading from? If so, do a 'request
system software delete-backup'. This could happen if either the .md5
file has incorrect value or the MD5 calculation of the JUNOS image is
different.
I'm actually just 'side-grading'. The original software was an install that was done from an install-media image of 9.1R2.10. I downloaded a domestic version of 9.1R2.10 the other night because the install-media installed the export version.
-evt
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
