inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[OSPF/150] 02:34:38, metric 1, tag 0
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.0/23 *[OSPF/150] 08:26:48, metric 0, tag 0
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.13/32 *[Direct/0] 1d 23:32:36
> via lo0.0
10.0.0.14/32 *[OSPF/10] 08:58:23, metric 2
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.31/32 *[OSPF/10] 08:58:32, metric 1
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.47/32 *[OSPF/10] 07:51:58, metric 2
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.48/30 *[Direct/0] 08:59:27
> via ge-1/3/0.0
10.0.0.49/32 *[Local/0] 1d 23:41:16
Local via ge-1/3/0.0
10.0.0.52/30 *[OSPF/10] 08:58:32, metric 2
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.56/30 *[OSPF/10] 07:51:48, metric 2
> to 10.0.0.50 via ge-1/3/0.0
10.0.0.60/30 *[OSPF/10] 07:09:00, metric 2
> to 10.0.0.50 via ge-1/3/0.0
224.0.0.5/32 *[OSPF/10] 1d 23:32:36, metric 1
MultiRecv
On Jan 20, 2009, at 12:28 AM, Felix Schueren wrote:
Cord MacLeod wrote:
Below is a configuration for my ex4200. I'm trying to make it the
gateway for all my traffic temporarily. All devices connected to
it are
running ospf, 2 m7s and another ex4200. All devices connected can
hit
all other devices on loopback and /30 addresses. However, only the
switch with the configuration below can get to the internet. It is
the
only switch which can hit 10.0.0.1, all others cannot ping this
address,
they can however ping 10.0.0.2. Any ideas?
version 9.3R2.8;
ge-1/0/1 {
unit 0 {
family inet {
address 10.0.0.2/23;
}
}
}
routing-options {
static {
route 0.0.0.0/0 {
next-hop 10.0.0.1;
retain;
readvertise;
metric 1;
}
}
router-id 10.0.0.31;
}
protocols {
ospf {
export ospf_policy;
area 0.0.0.0 {
interface ge-0/0/23.0;
interface ge-1/0/23.0;
interface lo0.0 {
passive;
}
interface ge-1/0/0.0;
interface ge-0/0/0.0;
}
}
lldp {
interface all;
}
rstp;
}
policy-options {
policy-statement ospf_policy {
term term1 {
from protocol static;
then accept;
}
term term2 {
from protocol direct;
then accept;
}
}
}
inet.0: 16 destinations, 16 routes (16 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 00:36:24, metric 1
to 10.0.0.1 via ge-1/0/1.0
10.0.0.0/23 *[Direct/0] 06:44:44
via ge-1/0/1.0
10.0.0.2/32 *[Local/0] 06:44:44
Local via ge-1/0/1.0
10.0.0.13/32 *[OSPF/10] 07:00:20, metric 1
to 10.0.0.49 via ge-1/0/0.0
10.0.0.14/32 *[OSPF/10] 07:00:10, metric 1
to 10.0.0.53 via ge-0/0/0.0
10.0.0.31/32 *[Direct/0] 07:01:20
via lo0.0
10.0.0.47/32 *[OSPF/10] 05:10:42, metric 1
to 10.0.0.58 via ge-1/0/23.0
to 10.0.0.62 via ge-0/0/23.0
10.0.0.48/30 *[Direct/0] 07:01:15
via ge-1/0/0.0
10.0.0.50/32 *[Local/0] 07:01:18
Local via ge-1/0/0.0
10.0.0.52/30 *[Direct/0] 07:01:07
via ge-0/0/0.0
10.0.0.54/32 *[Local/0] 07:01:16
Local via ge-0/0/0.0
10.0.0.56/30 *[Direct/0] 05:54:18
via ge-1/0/23.0
10.0.0.57/32 *[Local/0] 07:01:18
Local via ge-1/0/23.0
10.0.0.60/30 *[Direct/0] 05:10:47
via ge-0/0/23.0
10.0.0.61/32 *[Local/0] 05:10:47
Local via ge-0/0/23.0
224.0.0.5/32 *[OSPF/10] 07:01:22, metric 1
MultiRecv
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
what does the routing table on one of the other devices look like?
-felix
--
Felix Schüren
Head of NOC
------------------------------------------------------------------
Host Europe GmbH - http://www.hosteurope.de
Welserstraße 14 - D-51149 Köln - Germany
Telefon: (0800) 4 67 83 87 - Telefax: (01805) 66 32 33
HRB 28495 Amtsgericht Köln - UST ID DE187370678
Geschäftsführer:
Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
