This is the setup roughly. The gateway is a 3560 switch and has a
vlan defined for that 10net. There is also a static route on the
internet gateway to point everything 10.0.0.0/23 to 10.0.0.2.
10.0.0.2 being reachable from 10.0.0.1.
On Jan 20, 2009, at 1:55 AM, Felix Schueren wrote:
Cord MacLeod wrote:
As far as the router id, I went back to basics and looked in my junos
cookbook and didn't skip a beat when I first set this up and it
didn't
work. I just added in all of the steps it suggested, really
nothing of
consequence.
So, 10.0.0.0/24 is the network devices and 10.0.1.0/24 is the
machines.
That's why I have a /23 on that interface. Funny part is that
particular switch with 10.0.0.2 on it locally can hit the internet
and
10.0.0.1. No other device can nor can I ping 10.0.0.1 with any other
source on the local switch.
"internet gateway"
|
|
10.0.0.0/23
|
|
"ex4200"
| \
| \
| \
"other1" "other2"
| |
10.0.1.0/24
| |
"machines1" "machines2"
is that similiar to your setup? if it is, the "gateway" will most
likely
not try to reach anything within 10.0.0.0/23 routed, instead just
ARPing
on it's directly connected interface. From what I saw so far, end
machines should be able to send packets to 10.0.0.1, but it appears
that
10.0.0.1 can't send any packets back - can you monitor traffic on
10.0.0.1 to verify that?
-felix
--
Felix Schüren
Head of NOC
------------------------------------------------------------------
Host Europe GmbH - http://www.hosteurope.de
Welserstraße 14 - D-51149 Köln - Germany
Telefon: (0800) 4 67 83 87 - Telefax: (01805) 66 32 33
HRB 28495 Amtsgericht Köln - UST ID DE187370678
Geschäftsführer:
Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
