Hello,
I saw the same after upgrading from 9.2R2.15 to 9.3R2.8 and have not
tried later releases yet
Switch stopped detecting two SFP-SX installed in 4x GE SFP module
I do not know what brand they were
PIC 1 REV 03A 711-021270 AR0208112594 4x GE SFP
Xcvr 0 NON-SFP XGS00206 UNKNOWN
Xcvr 1 NON-SFP XGS00208 UNKNOWN
Xcvr 2 m> NON-JNPR H22L935 SFP-LX10
Xcvr 3 r NON-JNPR H22L933 SFP-LX10
Best regards,
Ruslan
Jeff S Wheeler wrote:
Is that an official SFP bought from juniper?
Perhaps they have decided that any SFP NOT from them will no longer
be allowed to work due to it not having a magic number in its
memory stored on the SFP.
That was my concern. I believe I will get a Juniper branded 1000baseT
SFP and try the 9.4 upgrade again. I was surprised that a Cisco brand
10GBASE-LR XFP continued to work while all my generic SFP-Ts failed to
establish any link.
I had hoped one of the Juniper list readers might comment on this.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
