Once installed, your router won't boot from it, since it's blank, so will boot from HD as normal. Then you should be able to issue 'request system snapshot partition' (ie. copy main contents of hard disk to flash drive). From that point on, the CF will be your primary boot medium. Any code upgrades from then on will occur on the CF card, so to back up that code and config in the future, you'd issue 'request system snapshot' to copy them to the HD, which is now your 'alternative' boot medium.
David 2009/3/3 Matthias Gelbhardt <[email protected]>: > Hi! > > I would like to add a new 1 GB CF card in a M7i. I assume, there is none in > that device at the moment: > > Filesystem Size Used Avail Capacity Mounted on > /dev/ad1s1a 217M 98M 102M 49% / > devfs 1.0K 1.0K 0B 100% /dev > devfs 1.0K 1.0K 0B 100% /dev/ > /dev/md0 23M 23M 0B 100% > /packages/mnt/jbase > /dev/md1 80M 80M 0B 100% > /packages/mnt/jkernel-8.5R3.4 > /dev/md2 8.8M 8.8M 0B 100% > /packages/mnt/jpfe-M7i-8.5R3.4 > /dev/md3 3.5M 3.5M 0B 100% > /packages/mnt/jdocs-8.5R3.4 > /dev/md4 28M 28M 0B 100% > /packages/mnt/jroute-8.5R3.4 > /dev/md5 8.8M 8.8M 0B 100% > /packages/mnt/jcrypto-8.5R3.4 > /dev/md6 37M 37M 0B 100% > /packages/mnt/jpfe-common-8.5R3.4 > /dev/md7 504M 8.0K 463M 0% /tmp > /dev/md8 504M 470K 463M 0% /mfs > /dev/ad1s1e 24M 20K 22M 0% /config > procfs 4.0K 4.0K 0B 100% /proc > /dev/ad1s1f 18G 542M 16G 3% /var > > So I need one to update to 9.3R2. > > Do I have to prepare the CF before injecting it into the router? Does it > have to be formatted? > > Regards, > > Matthias > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
