> From: Matthias Gelbhardt <[email protected]> > Date: Sat, 7 Mar 2009 21:46:50 +0100 > Sender: [email protected] > > Hi! > > So, i have tried it today. I failed. I had put in a formatted compact > flash, and I think that that was my failure, as the boot sequence was > stuck on the compact flash medium. So the compact flash must not be > formatted, it has to be blank, i.e. no partitions on it?
The flash must be unformatted or formatted for FreeBSD. I recommend that, if the card has not been formatted for a Juniper router, that you wipe it and let JunOS reformat. I sent instructions on doing this about a week ago. You can erase the format on the router, but it has to be up and running JunOS to do so. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [email protected] Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
