just attaching the interface config..
fe-5/2/2 {
vlan-tagging;
encapsulation vlan-ccc;
fastether-options {
loopback;
}
unit 100 {
encapsulation vlan-ccc;
vlan-id 600;
}
}
On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <[email protected]> wrote:
> Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
> see cisco fine... but i get this error on m40 ...
>
>
> neighbor 2.2.2.2 {
> interface fe-5/2/2.600 {
> virtual-circuit-id 999;
> }
> }
>
> 10 16:52:06.831491 [l2ckt_intf_change_process] Change processing for intf
> fe-5/2/2.600:
> Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update vc
> 2.2.2.2:999 --> interface not present
> Mar 10 16:54:53.521672 [l2ckt_intf_change_process] Change processing for
> intf fe-5/2/2.600:
> Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update vc
> 2.2.2.2:999 --> interface not present
> Mar 10 16:54:54.711437 [l2ckt_intf_change_process] Change processing for
> intf fe-5/2/2.600:
> Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update vc
> 2.2.2.2:999 --> interface not present
>
>
>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
