I think its misconfig.
You can configured unit 100 under fe-5/2/2 but in L2CKT you have
configured unit 600.
Thanks,
Nilesh
Dinesh wrote:
just attaching the interface config..
fe-5/2/2 {
vlan-tagging;
encapsulation vlan-ccc;
fastether-options {
loopback;
}
unit 100 {
encapsulation vlan-ccc;
vlan-id 600;
}
}
On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <[email protected]> wrote:
Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
see cisco fine... but i get this error on m40 ...
neighbor 2.2.2.2 {
interface fe-5/2/2.600 {
virtual-circuit-id 999;
}
}
10 16:52:06.831491 [l2ckt_intf_change_process] Change processing for intf
fe-5/2/2.600:
Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update vc
2.2.2.2:999 --> interface not present
Mar 10 16:54:53.521672 [l2ckt_intf_change_process] Change processing for
intf fe-5/2/2.600:
Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update vc
2.2.2.2:999 --> interface not present
Mar 10 16:54:54.711437 [l2ckt_intf_change_process] Change processing for
intf fe-5/2/2.600:
Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update vc
2.2.2.2:999 --> interface not present
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
