Thiago Drechsel - Gmail wrote:
Hi Jonathan.
That's a good point for the future :-(
But the problem is that I can't even establish PIM neighbors, with
simple multicast packets.
I can se PIM hello messages leaving olive, reaching my physical eth
interface, but I can't see PIM hello entering olive.
I think Olive OR VMware are unable to handle incoming PIM packets (not
multicast packets, since OSPF, LDP are working fine with default
configuration)
I'll investigate and find the culprit!
Ideas are welcome!
Best regards.
Thiago
-----Original Message-----
From: Jonathan Looney <[email protected]>
To: Thiago Drechsel - Gmail <[email protected]>
Cc: Juniper List <[email protected]>
Subject: Re: [j-nsp] Olive question - PIM not working
Date: Wed, 1 Apr 2009 10:38:52 -0400
Just a guess: depending on the PIM mode you are using, you may need a
tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM
decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a
problem.
-Jon
On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail
<[email protected]> wrote:
Hi list!
I have Olive boxes based on VMWare. I can connect these routers
together with vlan-id tag since FreeBSD has been patched with
syscall11.ko. Multicast seems to work, since ospf, rip and ldp
have worked well between two
routers.
Olive Box (Junos 8.5R1.14)
[Olive1]--em0.1-----------------------------em0.1--[Olive2]
Unfortunately, PIM does not seem to work.
Again, multicast has already been passed through those
interfaces
because I am running ospf and ldp on both routers and between
external applications.
Did anyone have the same problem? Any clue??
Thanks in advance!
--
Thiago Drechsel
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.35/2034 - Release Date: 04/01/09 06:06:00
Where can I find Olive or the VM image of this?
Thanks
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
