Hi all. Looks like the guy who wrote the multicast patch didn't add PIM multicast address (http://www.netemu.cn/bbs/archiver/tid-7417-page-1.html), or something like this...
Does anyone have patch source code? :-) Otherwise, we'll have to wait for a new patch. Thiago -----Original Message----- From: ChrisSerafin <[email protected]> To: Thiago Drechsel - Gmail <[email protected]> Cc: Jonathan Looney <[email protected]>, Juniper List <[email protected]> Subject: Re: [j-nsp] Olive question - PIM not working Date: Wed, 01 Apr 2009 11:20:53 -0500 Thiago Drechsel - Gmail wrote: > Hi Jonathan. > > That's a good point for the future :-( > But the problem is that I can't even establish PIM neighbors, with > simple multicast packets. > I can se PIM hello messages leaving olive, reaching my physical eth > interface, but I can't see PIM hello entering olive. > > I think Olive OR VMware are unable to handle incoming PIM packets (not > multicast packets, since OSPF, LDP are working fine with default > configuration) > > I'll investigate and find the culprit! > > Ideas are welcome! > > Best regards. > > Thiago > > -----Original Message----- > From: Jonathan Looney <[email protected]> > To: Thiago Drechsel - Gmail <[email protected]> > Cc: Juniper List <[email protected]> > Subject: Re: [j-nsp] Olive question - PIM not working > Date: Wed, 1 Apr 2009 10:38:52 -0400 > > Just a guess: depending on the PIM mode you are using, you may need a > tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM > decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a > problem. > > -Jon > > On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail > <[email protected]> wrote: > Hi list! > > I have Olive boxes based on VMWare. I can connect these routers > together with vlan-id tag since FreeBSD has been patched with > syscall11.ko. Multicast seems to work, since ospf, rip and ldp > have worked well between two > routers. > > > Olive Box (Junos 8.5R1.14) > > [Olive1]--em0.1-----------------------------em0.1--[Olive2] > > > Unfortunately, PIM does not seem to work. > > > Again, multicast has already been passed through those > interfaces > because I am running ospf and ldp on both routers and between > external applications. > > Did anyone have the same problem? Any clue?? > > Thanks in advance! > > -- > Thiago Drechsel > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.238 / Virus Database: 270.11.35/2034 - Release Date: 04/01/09 > 06:06:00 > > Where can I find Olive or the VM image of this? Thanks _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
