Hi There is no option for configuring Nantech TrafficGen to negotiate inet-multicast. The only think Ican do in Nantech is to put the source address, the destination address, the local AS and the peer-AS.
Thanks 2009/4/17 Chuck Anderson <[email protected]> > On Fri, Apr 17, 2009 at 12:11:42PM +0100, Mohamed Jrad wrote: > > I want to use nantech trafficgen to generate thousands of BGP routes. > > > > “Nantech trafficgen is a software which work on windows, it can generate > > thousands of BGP updates with different attributes “ > > > > The router with which I work is an M120 router. > > > > The junos version is 9.1R1.8. > > > > The problem that I encountered is that when I start generating updates > the > > M120 router turn down the BGP session, it send “bgp_read_v4_update:7824: > > NOTIFICATION sent to 11.11.11.12 (External AS 64512): code 3 (Update > Message > > Error) subcode 10 (bad address/prefix field), Reason: peer 11.11.11.12 > > (External AS 64512) UPDATE - NLRI inet-multicast not negotiated” please > see > > the entire log file enclosed. > > > > *NB:* I configured “family inet any” under [edit protocols bgp group > > nanotech] > > The peer needs to negotiate inet-multicast before it sends multicast > routes. It appears to be not doing that. Reconfigure trafficgen to > negotiate inet-multicast as well as inet-unicast. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
