I tried to configure a confederation on the M120 router (means that Nantech and the M120 router are in the same confederation but not in the same AS) the error message changed, the new error message is " AS path attribute problem ". I tried the same think in a cisco router and it works fine, there is no problem and I succeeded in creating thousands of BGP routes. So I don't know why Nantech work with cisco and it don't work with Juniper.
2009/4/18 Chuck Anderson <[email protected]> > On Sat, Apr 18, 2009 at 03:21:24PM +0100, Mohamed Jrad wrote: > > There is no option for configuring Nantech TrafficGen to negotiate > > inet-multicast. > > The only think Ican do in Nantech is to put the source address, the > > destination address, the local AS and the peer-AS. > > So Nantech TrafficGen is sending inet-multicast routes, but can't > negotiate the BGP session to do so? Nantech TrafficGen sounds broken > then. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
