> -----Original Message----- > From: Stacy W. Smith [mailto:[email protected]] > Sent: Wednesday, May 06, 2009 10:39 AM > To: Eric Van Tol > Cc: juniper-nsp > Subject: Re: [j-nsp] 9.3 and M20 FPC > > From the 9.3 release notes: > > "On M20 routers running JUNOS Release 9.3 and later, nonenhanced FPCs do > not come online because of memory limitations. These FPCs appear as > FPC in > the Description column of the output from the show chassis hardware > command. > As announced in Technical Bulletin PSN-2004-08-024, these FPCs have > not been > supported since 31 December 2004. (To access the bulletin, log in at > https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2004-08- > 024&actionBtn=Search.) > [PR/291610]" > > --Stacy
Understood. Since this is the case, I'd suggest that Juniper fix their JUNOS Hardware Validation tool: http://tools.juniper.net/microcode/ They're getting into Cisco IOS Software Advisor territory by allowing invalid hardware configurations to get past the tool that's supposed to help spot such things. -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
