On Wed, May 27, 2009 at 4:30 PM, Harry Reynolds <[email protected]> wrote: > I have not tried in years, but the last I did, an olive would not do l2. All > was A-ok in the control plane, but no data would flow. > > Sounds like what you have hit. >
I've tried this with both VMware and Qemu virtualisation and also had no joy. I'm assuming this is down to the data plane limitations of em / fxp interfaces (for Kompella style L2 VPN you can't even configure the required encapsulation type on these interfaces). > Regards > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Thiago Drechsel > Sent: Wednesday, May 27, 2009 6:03 AM > To: [email protected] > Subject: [j-nsp] Olive and l2circuit > > Hi list. > > Was anybody able to configure/test l2circuit using olive running on virtual > machines? > A have a basic topology, for study purposes, everything is correctly > configured but traffic don't go through the pw. > > Any similar experience on the list? > > Thank you! > > Thiago > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
