As far as l2ckt(ldp) is concerned it supports both vlan-ccc on em/fxp and works pretty well.
L2vpn doesn't work as em/fxp isn't supported in the l2vpn routing-instance. On Thu, May 28, 2009 at 5:42 PM, Danny Vernals <[email protected]>wrote: > On Wed, May 27, 2009 at 4:30 PM, Harry Reynolds <[email protected]> wrote: > > I have not tried in years, but the last I did, an olive would not do l2. > All was A-ok in the control plane, but no data would flow. > > > > Sounds like what you have hit. > > > > I've tried this with both VMware and Qemu virtualisation and also had > no joy. I'm assuming this is down to the data plane limitations of em > / fxp interfaces (for Kompella style L2 VPN you can't even configure > the required encapsulation type on these interfaces). > > > Regards > > > > > > > > -----Original Message----- > > From: [email protected] [mailto: > [email protected]] On Behalf Of Thiago Drechsel > > Sent: Wednesday, May 27, 2009 6:03 AM > > To: [email protected] > > Subject: [j-nsp] Olive and l2circuit > > > > Hi list. > > > > Was anybody able to configure/test l2circuit using olive running on > virtual machines? > > A have a basic topology, for study purposes, everything is correctly > configured but traffic don't go through the pw. > > > > Any similar experience on the list? > > > > Thank you! > > > > Thiago > > _______________________________________________ > > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
