There is knob for no tunnel service pic: https://www.juniper.net/techpubs/software/junos/junos92/swconfig-vpns/no-tunnel-services.html
Paulo On Thu, Jul 23, 2009 at 2:32 PM, Thiago Drechsel <[email protected]>wrote: > Hi Tomas. > > AFAIK, VPLS needs Tunnel Service PIC (In this case, you'd have "vt" > interface, instead of "lsi" interface) > More info about virtual ports: > > > http://www.juniper.net/techpubs/software/junos/junos95/swconfig-vpns/id-11490128.html > > If you don't have TS PIC, you can use no-tunnel-services command (I can > see you're using it) but the problem here is that you'll need enhanced > FPCs. > > I not sure about J-series, but I would say that you're facing a hw > related issue. > > Hope it helps. > > Best regards. > > -- > Thiago > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
