9.3S1.6 -b
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chuck Anderson Sent: Wednesday, August 05, 2009 8:42 AM To: [email protected] Subject: Re: [j-nsp] router protect policy On Wed, Aug 05, 2009 at 08:11:58AM -0700, Bill Blackford wrote: > I'm trying to form a router protect policy on an EX3200 that is > being used as a layer3 border device receiving default routes only > (temporary until it's replaced by an M series). I was able to create > a policy that works fine for EX series running layer2 only services. > Are there any examples or templates to look at? What version of JUNOS? > ## > ## Warning: configuration block ignored: unsupported > platform (ex3200-24t) > ## > source-prefix-list { > NMS-NETWORKS; > } source-prefix-list works on my EX4200's running 9.5R2.7 here. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
