Bill,
Can you try removing the "except" knob.
source-prefix-list {
NMS-NETWORKS except; <<<--
source-prefix-list {
BGP-NEIGHBORS except; <<<--
Thanks & Regards,
Tarique A. Nalkhande
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bill Blackford
Sent: Wednesday, August 05, 2009 9:24 PM
To: Chuck Anderson; [email protected]
Subject: Re: [j-nsp] router protect policy
9.3S1.6
-b
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Chuck Anderson
Sent: Wednesday, August 05, 2009 8:42 AM
To: [email protected]
Subject: Re: [j-nsp] router protect policy
On Wed, Aug 05, 2009 at 08:11:58AM -0700, Bill Blackford wrote:
> I'm trying to form a router protect policy on an EX3200 that is
> being used as a layer3 border device receiving default routes only
> (temporary until it's replaced by an M series). I was able to create
> a policy that works fine for EX series running layer2 only services.
> Are there any examples or templates to look at?
What version of JUNOS?
> ##
> ## Warning: configuration block ignored:
unsupported platform (ex3200-24t)
> ##
> source-prefix-list {
> NMS-NETWORKS;
> }
source-prefix-list works on my EX4200's running 9.5R2.7 here.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
