-----Original Message----- Is there an issue where the ERX will not accept a DS3-4P I/O and OC3/OC12/DS3-ATM card set in slot zero? I am having no luck with search engines and our vendor's support folks. There is no problem when I put them in other slots. ----------------------------------
--- [email protected] wrote:-------- From: Andy Vance <[email protected]> None that I'm aware of, can you shoot a show hard and a show ver from that chassis with the card in? We have GE cards in slot 0 but I don't recall any card type limitation. ----------------------------------------- The card is not in there now. I did the normal slot disable, erase and accept stuff and all I see is hardware error after it tries to boot, but it does not do this on the other slots. We have more than one ERX, I guess I'll try another. I just wanted to ask the group before I got a tech out there at 2am again... scott ====================== ==================== ===================== _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
