On Tue, Sep 1, 2009 at 10:27 PM, Scott Weeks <[email protected]> wrote:

> Is there an issue where the ERX will not accept a DS3-4P I/O and
> OC3/OC12/DS3-ATM card set in slot zero?  I am having no luck with search
> engines and our vendor's support folks.  There is no problem when I put them
> in other slots.
------------------------------------------



------- [email protected] wrote: -------
From: Shiva Shankar <[email protected]>

Do you have redundant slot comnibation for slot 0,1&2..if so, then you can't
mis-match different card...
-------------------------------------------



That's the thing I am having trouble with.  In the slot I see a "R-MiD OCx I/O" 
card, but no line card in the other side.  I looked inside the chassis and 
don't think I see the redundancy backplane extension.  "sho redundancy" says I 
have nothing:

HNLLHIMN16W#sho redundancy

SRP
---

high-availability state:  disabled
current redundancy mode:  file-system-synchronization
last activation type:     cold-start

Criteria Preventing High Availability from being Active
-------------------------------------------------------
            criterion                met
----------------------------------   ---
High Availability mode configured?   No

Line Card
---------

automatic reverting is off

                            backed
                              up     sparing
       hardware   lockout     by       for     revert
slot     role     config     slot     slot       at
----   --------   -------   ------   -------   ------
 1     primary      ---      ---       ---      ---
 2     primary      ---      ---       ---      ---
 4       ---        ---      ---       ---      ---
 5       ---        ---      ---       ---      ---
 8       ---        ---      ---       ---      ---
 9       ---        ---      ---       ---      ---
 10      ---        ---      ---       ---      ---
 11      ---        ---      ---       ---      ---
 12      ---        ---      ---       ---      ---
 13      ---        ---      ---       ---      ---

        midplane   midplane
slots     type       rev
-----   --------   --------
  1        6          0
  2        6          0

>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ======================
> ====================
> =====================
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to