This has been discused several times on the Juniper J-net forum http://forums.juniper.net/jnet/board/message?board.id=switch&thread.id=672 http://forums.juniper.net/jnet/board/message?board.id=switch&message.id=525
The answer is yes via Groups The answer is also yes via JWEB in which you can select several interfaces and change the config. -----Message d'origine----- De : [email protected] [mailto:[email protected]] De la part de [email protected] Envoyé : jeudi 15 octobre 2009 18:30 À : [email protected] Cc : [email protected] Objet : Re: [j-nsp] group interface Any chance for apply-group should accomplish this? Is quite wired that Junos can handle this kind of operation. _____ From: Malte von dem Hagen [mailto:[email protected]] Sent: Thursday, October 15, 2009 5:26 PM To: [email protected] Cc: [email protected] Subject: Re: [j-nsp] group interface Hi, [email protected] schrieb: > Which Junos command is parallel to IOS "interface range"? there is none, please see http://puck.nether.net/pipermail/juniper-nsp/2009-July/013598.html and following for a not-so-old discussion regarding this topic. Depending on what is your goal, groups or macros/scripts may help you. rgds, Malte _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
