Yes, an apply group would do fine in this task if it is identical information for several ports.
Patrik [email protected] wrote: > Any chance for apply-group should accomplish this? > > Is quite wired that Junos can handle this kind of operation. > > > > _____ > > From: Malte von dem Hagen [mailto:[email protected]] > Sent: Thursday, October 15, 2009 5:26 PM > To: [email protected] > Cc: [email protected] > Subject: Re: [j-nsp] group interface > > > > Hi, > > [email protected] schrieb: >> Which Junos command is parallel to IOS "interface range"? > > there is none, please see > http://puck.nether.net/pipermail/juniper-nsp/2009-July/013598.html > and following for a not-so-old discussion regarding this topic. > > Depending on what is your goal, groups or macros/scripts may help you. > > rgds, > > Malte > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- //Patrik Webkom http://www.webkom.se +46 (0)709 35 22 99 +46 (0)8 559 26 488 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
