Hello Onam,
try to change ethertype from Summit side:
configure vman ethertype 0x8100
best regards,
--
Evgeniy Aikashev
network engineer
JSC DATAGROUP
Monday, October 19, 2009, 3:30:51 AM, Onam wrote:
> Hi experts,
> I want to make logical interfaces on a physical interface ge-0/2/0 of a
> Juniper M10 router to
> connected to a the trunk port of a Summit Extreme x450 with the ethertype
> 0x88a8 (IEEE 802.1ad).
> I have the following configuration on the router.
> ge-0/2/0 {
> vlan-tagging;
> gigether-options {
> ethernet-switch-profile {
> tag-protocol-id 0x88a8;
> }
> }
> unit 50 {
> vlan-tags outer 0x88a8.50;
> family inet {
> address 192.168.175.169/28;
> }
> }
> }
> I made the test with the 802.1q and it works but with 802.1ad didn't work.
> Best regards.
>
> _________________________________________________________________
> News, entertainment and everything you care about at Live.com. Get it now!
> http://www.live.com/getstarted.aspx
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
