Thanks Evgeniy, Maybe there is something I am doing wrong.
Best regards. > Date: Mon, 19 Oct 2009 10:47:16 +0300 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re[2]: [j-nsp] Logical Interfaces 802.1ad > > Also works fine: > > {master}[edit interfaces xe-4/1/0] > evge...@mx480# show > description "=== Summit X650 test ==="; > flexible-vlan-tagging; > encapsulation flexible-ethernet-services; > gigether-options { > ethernet-switch-profile { > tag-protocol-id 0x88a8; > } > } > unit 100 { > description "=== Summit X650 test ==="; > vlan-tags outer 0x88a8.4092 inner 100; > family inet { > address x.x.x.x/30; > } > } > > Summit: > enable jumbo-frame ports all > > > best regards, > -- > Evgeniy Aikashev > network engineer > JSC DATAGROUP > > Monday, October 19, 2009, 10:17:22 AM, Onam wrote: > > Hello Evgeniy, > > > I made some test before with this ethertype and it works. The Extreme x450 > > use both of them > > 0x8100 for VLAN and 0x88a8 for VMAN so if i do that the VMAN will become a > > VLAN. > > > I see that by default the Juniper router M10 use ethertype 0x8100, but when > > I try to use > > ethertype 0x88a8 the devices doens't see each other, I run a ping to the > > other side with no response. > > > >> Date: Mon, 19 Oct 2009 09:58:23 +0300 > >> From: [email protected] > >> To: [email protected] > >> CC: [email protected] > >> Subject: Re: [j-nsp] Logical Interfaces 802.1ad > >> > >> Hello Onam, > >> try to change ethertype from Summit side: > >> > >> configure vman ethertype 0x8100 > >> > >> best regards, > >> -- > >> Evgeniy Aikashev > >> network engineer > >> JSC DATAGROUP > >> > >> Monday, October 19, 2009, 3:30:51 AM, Onam wrote: > >> > >> > Hi experts, > >> > >> > I want to make logical interfaces on a physical interface ge-0/2/0 of a > >> > Juniper M10 router to > >> > connected to a the trunk port of a Summit Extreme x450 with the > >> > ethertype 0x88a8 (IEEE 802.1ad). > >> > >> > I have the following configuration on the router. > >> > >> > ge-0/2/0 { > >> > vlan-tagging; > >> > gigether-options { > >> > ethernet-switch-profile { > >> > tag-protocol-id 0x88a8; > >> > } > >> > } > >> > unit 50 { > >> > vlan-tags outer 0x88a8.50; > >> > family inet { > >> > address 192.168.175.169/28; > >> > } > >> > } > >> > } > >> > >> > I made the test with the 802.1q and it works but with 802.1ad didn't > >> > work. > >> > >> > Best regards. > >> > > >> > _________________________________________________________________ > >> > News, entertainment and everything you care about at Live.com. Get it > >> > now! > >> > http://www.live.com/getstarted.aspx > >> > _______________________________________________ > >> > juniper-nsp mailing list [email protected] > >> > https://puck.nether.net/mailman/listinfo/juniper-nsp > >> > > > Get news, entertainment and everything you care about at Live.com. Check it > > out! > _________________________________________________________________ Discover the new Windows Vista http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
