Hi Bill
Not sure if it makes a difference, but try telling the switch that it's
a 1G link , i.e.
aggregated-ether-options {
link-speed 10g;
lacp {
active;
}
}
Failing that, maybe if you look in the logs, or at the show interface
ae0 extensive and show lacp interfaces output maybe something is
obvious ...
I certainly have these working in our lab here
cheers
Sean
On 10/28/09 5:23 PM, Bill Blackford wrote:
I am attempting to form a L3 bundle on a EX3200 and am running into snags. I've
been able to form L2 LACP bundles but first time attempting at L3.
I'm not able to link with another switch, host or device that also is
configured with a LACP L3 bundle.
Details:
EX3200
Ver 9.5R2.7
chassis {
aggregated-devices {
ethernet {
device-count 2;
}
}
}
ge-0/0/22 {
description "Port1";
ether-options {
802.3ad ae0;
}
}
ge-0/0/23 {
description "Port2";
ether-options {
802.3ad ae0;
}
}
ae0 {
description L3 Bundle;
aggregated-ether-options {
lacp {
active;
}
}
unit 0 {
family inet {
address xxx.xxx.xxx.xxx/29;
}
}
}
Thanks in advance
-b
--
Bill Blackford
Senior Network Engineer
Technology Systems Group
Northwest Regional ESD
my /home away from home
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
