Is the AE coming up? Try show lacp interfaces and show int ae0 extensive the
show LACP should tell you if you have a timer mismatch between them. If the AE0
isn't up then try a configuration like
Aggregated interface: ae0
LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity
ge-0/0/1 Actor No No Yes Yes Yes Yes Slow Active
ge-0/0/1 Partner No No Yes Yes Yes Yes Slow Active
ge-4/0/0 Actor No No Yes Yes Yes Yes Slow Active
ge-4/0/0 Partner No No Yes Yes Yes Yes Slow Active
LACP protocol: Receive State Transmit State Mux State
ge-0/0/1 Current Slow periodic Collecting distributing
ge-4/0/0 Current Slow periodic Collecting distributing
Aggregated interface: ae1
LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity
xe-0/1/0 Actor No No Yes Yes Yes Yes Fast Active
xe-0/1/0 Partner No No Yes Yes Yes Yes Fast Active
LACP protocol: Receive State Transmit State Mux State
xe-0/1/0 Current Fast periodic Collecting distributing
ae0 {
description "Connection to Backup2";
aggregated-ether-options {
flow-control;
minimum-links 1;
link-speed 1g;
lacp {
active;
periodic slow; <-- if there is a timer mismatch
}
}
unit 0 {
family inet {
address 10.1.67.1/30;
}
}
Nathan Sipes
Sr. Network Design Specialist
Tel: 303-914-4996
FAX: 303-763-3510
Kinder Morgan
370 Van Gordon St
Lakewood, CO
80228
[email protected]
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bill Blackford
Sent: Wednesday, October 28, 2009 10:23 AM
To: [email protected]
Subject: [j-nsp] Layer3 LACP Bundle
I am attempting to form a L3 bundle on a EX3200 and am running into snags. I've
been able to form L2 LACP bundles but first time attempting at L3.
I'm not able to link with another switch, host or device that also is
configured with a LACP L3 bundle.
Details:
EX3200
Ver 9.5R2.7
chassis {
aggregated-devices {
ethernet {
device-count 2;
}
}
}
ge-0/0/22 {
description "Port1";
ether-options {
802.3ad ae0;
}
}
ge-0/0/23 {
description "Port2";
ether-options {
802.3ad ae0;
}
}
ae0 {
description L3 Bundle;
aggregated-ether-options {
lacp {
active;
}
}
unit 0 {
family inet {
address xxx.xxx.xxx.xxx/29;
}
}
}
Thanks in advance
-b
--
Bill Blackford
Senior Network Engineer
Technology Systems Group
Northwest Regional ESD
my /home away from home
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
