Bill-
JunOS supports a 'local-address' statement within a neighbor or BGP
group, which is pretty much the same as update-source on cisco, although
it uses an IP rather than interface name.
David
On 2/4/2010 12:07 PM, Bill Blackford wrote:
I'm running a mixed environment of Juniper and Cisco and have noticed some odd
behavior with some of iBGP peers. It's my understanding that Junos has no
equivalent to the Cisco 'update-source loobback0'. I haven't run into to
problems peering with the respective loopback between a Cisco to Juniper but
have with a Juniper to Juniper (that is attempting to bring the peers up via
the loopbacks). Although my tests were limited and lack too many details, I'm
curious if anyone has run up against this issue and what your recommendations
are.
Thank you,
-b
--
Bill Blackford
Senior Network Engineer
Technology Systems Group
Northwest Regional ESD
this message was composed using 100% recycled electrons
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
